A multilayer recognition model for twitter user geolocation

Wireless Networks - Geolocation is important for many emerging applications such as disaster management and recommendation system. In this paper, we propose a multilayer recognition model (MRM) to...     

Tempering–preservation treatment inactivated lipase in wheat bran and retained phenolic compounds

Wheat bran is rich in functional ingredients, but the high level of lipase limits its applications. Tempering–preservation treatment (at 70–90 °C with moisture of 20%–40% for 1–4 h) was exploited for stabilising wheat bran and its effect on polyphenols was investigated. The results showed that more lipase was inactivated at higher tempering moisture, temperature and longer time. The optimum condition for inactivation of wheat bran lipase was 30% moisture and 90 °C for 4 h. The inactivation rate reached 93.8% with a residual enzyme activity of 0.264 U g⁻¹. Under the optimum condition, the sum of free phenolic acids rose from 25.4 to 55.8 µg g⁻¹. As for bound phenolic acids, there was a slight increase of hydroxybenzoic acid derivatives but a slight decrease of hydroxycinnamic acid derivatives. The total contents of phenolic acids before and after stabilisation were not significantly different. This study showed the possibility of using tempering–preservation as an efficient method for inactivation of wheat bran lipase while maintaining its phenolic compounds, which could be used in the production of whole wheat flour.     

Fabrication of high-efficiency Yb:Y2O3 laser ceramics without photodarkening

High-efficiency Yb:Y₂O₃ laser ceramics were fabricated using the vacuum-sintering plus hot isostatic pressing (HIP) without sintering additives. High-purity well-dispersed nanocrystalline Yb:Y₂O₃ powder was synthesized using a modified co-precipitation method in-house. The green bodies were first vacuum sintered at a temperature as low as 1430°C and then HIPed at 1450°C. Finally, the samples were air annealed at 800°C for 10 h. Although no sintering aids were used, full density of the samples with excellent optical homogeneity and an inline transmission of 80% at 400 nm could be obtained. Moreover, photodarkening phenomenon was not detected in the ceramics. Preliminary laser experiment with the fabricated ceramics in a two-mirror cavity has demonstrated 32 W continuous-wave (CW) output at ∼1077 nm with an optical-to-optical conversion efficiency of 58.2%. To the best of our knowledge, this is so far the highest CW output power and optical-to-optical conversion efficiency achieved with the Yb³⁺-doped sesquioxide ceramics in a simple two-mirror cavity.     

Suitability Evaluation of Cultivated Land Reserved Resources in Arid Areas Based on Regional Water Balance

With rapid socioeconomic and population growth, high-quality arable land resources are decreasing daily, especially in arid areas, which makes arable land reserve resources an important way to supplement arable land. How to accurately evaluate cultivated land reserve resources is of great significance to socioeconomic development and sustainable land use in arid areas. Therefore, this study selected Hangjin Banner as a typical area and calculated the regional maximum available irrigation water based on the principle of regional water balance. Then, the "irrigation area check algorithm" was used to evaluate the amount of cultivated land reserve resources, and policy recommendations were proposed for the development and utilization of cultivated land resources. The results showed that Hangjin Banner had no cultivated land reserve resources under the current irrigation method and had cultivated land reserve resources under the efficient water-saving irrigation method, but only in the southern zone during normal and partially abundant water years. Therefore, we believe that arid areas should adhere to the "set land by water" principle, the allocation of water resources should be optimized, and cultivated land resources with high quality should be utilized based on the actual regional conditions.

     

欧美大型钢制低温储罐抗震设计方法对比分析

以欧美标准中的单包容与全包容低温储罐中的钢制储罐抗震设计方法为分析对象，从抗震设防水准与目标、抗震设计反应谱以及抗震设计准则如地震作用调整系数、阻尼比、载荷组合、抗震许用应力、抗倾覆与滑移、晃动波高等方面进行分析对比，为欧美低温储罐抗震设计方法的工程应用提供参考。为实现抗震设防目标以及与该国(区域)建筑抗震以及荷载标准体系协调，欧美低温储罐抗震各设计准则均存在一定的差异，工程设计时应合理应用以避免安全隐患。     

Study of Cu/Mn Catalysts for Coreactions of NH3-SCR and CO Oxidation

Catalysis Letters - To explore the possibility of coreaction of selective catalytic reduction with NH3 (NH3-SCR) and CO oxidation (CO-O), bimetallic doping catalysts of Mn and Cu were synthesized...     

Method of sensitive data mining based on Pan-Bull algebra

Wireless Networks - In order to improve the transmission stability of sensor networks, a sensitive data mining method based on Pan Boolean algebra is proposed. According to the output correctness,...